D
Touch Paper Size.
If you will not change the paper size, touch OK.
Select a category and select the target paper size.
Note:
Setting non-standard size
For a non-standard size, touch User-Defined at
the end of the list and then enter the paper width
and length.
On the keypad screen for entering a numeric value,
enter numbers that include a number of the first
decimal place. For example, if you want to enter 5
m, touch [5] and [0].
E
When the screen of step 1 is redisplayed, touch
OK.
You can start printing once Ready appears on the
screen.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
47
To Next Page
Loading...
Need help?
General