If the desired size is not available in the
pull-down menu of the Change Paper Size dialog
box, click Custom Paper Size... and then set and
save a custom size.
U “Printing at Non-Standard Sizes” on
page 68
E
Set Output Size.
To enlarge or reduce the size, select from the
pull-down menu below the Document Size.
See the following for more details on
enlargement settings.
U “Enlargements and Horizontal and Vertical
Banners” on page 63
F
Select Source and check the roll paper width
(paper size when cut sheet) and paper type.
Select from Roll Paper and Sheet. If you select a
paper source for which paper is not loaded in the
printer,
appears.
For Roll Paper Width (Paper Size when cut sheet)
and Media Type, the settings configured in the
control panel of the printer are applied
automatically.
Note:
If the paper is loaded or changed after opening the
printer driver's dialog box, the paper size and paper
type settings configured on the printer will not be
applied. In this case, click the Acquire Info button
to apply the settings.
G
Select Select Target in Print Quality.
Choose an option according to the type of
document and how it will be used.
To set the color correction method or color
balance in detail to match your preferences, clear
the Simple Settings check box. See the following
for more details.
U “Correct color and print” on page 76
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
52
To Next Page
Loading...
Need help?
General