If it differs, click Settings... and specify the
correct size in the Change Paper Size dialog box.
U “Basic Operating Procedures (Windows)”
on page 51
Mac
Open the page setup screen of the application
and check that this printer is selected in Printer
and check the paper size.
Select a paper size that does not have (Retain
Scale) or (Roll Paper Banner).
If the size is different, select the correct size from
the pull-down menu.
U “Basic Operating Procedures (Mac)” on
page 57
Note:
In the case of an application without a page setup
menu item, you can set the paper size if you open
the Print dialog box from the Print menu item.
B
Click Fit to Roll Paper Width on the Printer
Settings tab of the printer driver and select either
Fit Short Side to Roll Paper Width or Fit Long
Side to Roll Paper Width.
Windows
Mac
Fit Short Side to Roll Paper Width
Select this when you want to print with the print
image enlarged to the maximum size for the
loaded roll paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
64
To Next Page
Loading...
Need help?
General