Epson Scanner Quick Start Guide
1) Place the item you want to scan on the scanner:
Scanning a document or photo:
Place your document or photo face-down on the scanner. Make
sure the upper left corner of the document or photo is touching
the rear right corner of the scanner, next to the arrow mark.
Close the scanner cover gently so your original does not move.
Scanning slides or film (NOTE: Please ask at the Reference Desk for the
slide and film holders.)
When scanning slides or film, you first must remove the
document mat. Open the scanner cover and gently slide
the mat up to remove it.
You will then place the film or slides in the film and slide holder.
Placing 35 mm Film:
Open the cover of the 35 mm film strip holder.
Slide one or two film strips all the way into the film
holder with the shiny base side facing down. Your
images and any wording on the film strips should
appear backwards on the side that faces up.
Close the cover and press it down until you hear a click.
Then press down on all the edges of the cover to secure it.
Place the film holder on the document table so that it is
aligned with the upper left corner. Make sure the tab
labeled “A” on the film holder fits into the area labeled
“A” on the scanner.
Close the scanner cover.
To Next Page
Need help?
General