What to do if my Epson Printer has a paper jam?
If your Epson Printer displays a 'Paper Jam' error, try these steps: 1. Press the [Paper] switch on the printer panel. 2. If the error persists, open the printer cover and remove all paper from inside the printer and the hopper. 3. Ensure there is no paper inside, then load paper on the hopper and press the [Paper] switch again.
How to fix Epson Stylus C67 ink end / no ink cartridge / CSIC error?
If your Epson Printer indicates 'Ink end/ No ink cartridge/ CSIC error', it could be due to several reasons: * The ink in the Bk, Y, M, C cartridges might be depleted. * The ink cartridges may not be correctly installed. * Non-genuine ink cartridges might be in use. To resolve this: * Check the ink cartridges and reinstall them properly. * Replace any non-genuine ink cartridges with genuine ones.
What to do if my Epson Stylus C67 Printer displays a fatal error?
If your Epson Printer shows a 'Fatal error', try the following steps: 1. Turn the power off, wait a few seconds, and then turn it back on. 2. If the error persists, turn the power off again, remove any paper from the hopper, and then: * Open the printer cover, check the ink cartridges, and reinstall them correctly. * Check for any foreign material or paper inside the printer and remove it. 3. Turn the printer power on again.
Why does my Epson Printer say 'Paper Out' and how do I fix it?
If your Epson Printer displays a 'Paper Out' error, it could be due to these reasons: * Attempting to load paper when there is no paper in the tray. * Paper stopping before the PE Sensor or failing to feed correctly. * Paper being loaded without being placed against the right edge guide. * The connector of the PE sensor is disconnected. To solve this: 1. Load paper into the paper tray if it is empty. 2. If the paper stopped halfway, remove it, ensure it is not bent, fan the paper, and load it against the edge guide. 3. Press the [Paper] switch to clear the error.
What to do if my Epson Stylus C67 Printer shows a multi-feed error?
If your Epson Printer displays a 'Multi-feed error', it could be due to: * Blank paper being ejected during duplex printing. * The printer detecting the paper as too long upon ejection. To resolve this: 1. Remove the blank paper or verify the paper size. 2. Press the [Paper] switch to eject the paper and clear the error.
Instructions for printing documents on Windows.
Safety guidelines for handling and storing ink cartridges.
Step-by-step guide to replacing ink cartridges.
Explains printer light indicators and their meanings for troubleshooting.
Common issues like banding and solutions like head cleaning.
Specific safety guidelines for handling and storing ink cartridges.
To Next Page
General