Removing and Installing Ink Cartridges 25
The ink cartridge holder moves to the left, and the cartridge that needs to be
replaced stops under the _ ink out mark. The P power light begins to flash.
Caution: To avoid damaging the printer, never move the print head by hand.
Note: Don’t hold down the
H ink button for more than 2 seconds, or the printer will
start to clean the print head.
3. Press the H ink button again.
■ If more than one cartridge is empty, the next cartridge moves under the
_ ink out mark.
■ If all the empty cartridges have been identified, the print head moves to
the ink cartridge replacement position, as shown below.
To Next Page
Loading...
Need help?
General