Epson Stylus CX3700 - Page 110

EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850 Revision A
DISASSEMBLY/ASSEMBLY Printer Section 110
 External view (2)
Figure 4-18. Removing Stacker Lock/Rubber Feet
 Stacker Lock Removal
1. Remove the tabs (x2, ) that secure the Stacker Lock, and remove the
Stacker Lock and Compression Spring 5.1 from the Housing, Lower.
 Rubber Feet Removal
1. Remove the rubber feet (x4) from the Housing, Lower.
Right Side
Tabs
Shaft and Groove
Compression Spring 5.1
Right Side
Stacker Lock
Rubber Feet
Pass the shaft of the Stacker Lock through the groove of the
Housing Lower.