EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850 Revision A
PRODUCT DESCRIPTION Control Panel 27
1.5 Control Panel
1.5.1 Buttons
The control panel contains following seven buttons, which are used to set and execute
various operations.
All of them are non-lock type buttons.
Note *1: B&W means “Black and White”.
Refer to “1.5.3.1 Stand-alone Copy” (p.29) for details about each button.
1.5.2 Indicators
The control panel contains following six LEDs, which are used to indicate various
status.
Note *1: All LEDs except for Power LED will be turned off while printing or scanning by PC.
*2: Depending on its market. Letter and 4"x6" are for North and South
America, and A4
and 10x15 are for other areas.
Table 1-33. Buttons
Button Function
Power Button
Execute turning on/off this unit.
Ink Button Execute exchanging ink cartridges or head cleaning.
Paper Size Button Select paper size.
Fit to Page Button Alternate zoom of “Fit to page” and default (actual; 100%).
B&W Start Button *
1
Start monochrome copy.
Color Start Button Start card print or color copy.
Stop Button
Stop job of copying or printing or sometimes work as shift button.
Table 1-34. Indicators
LED Function
Power LED [Green] *
1
Light at stand-by. Blink while some operation is proceeding.
Error LED [Red] Light or blink while some error or warning is occurring.
Ink LED [Red]
Light when some ink is out. Blink when some ink is near empty or
in the ink cartridge exchanging procedure.
Paper Size LED 1,2 Light one of them showing which paper size below is selected.
1
st
[Green] A4 or Letter *
2
2
nd
[Green] 10x15 or 4"x6" *
2
Fit to Page LED
[Green]
Light when “Fit to Page” function is effective in copy mode.
To Next Page
Loading...
