Epson Stylus CX3700 - Page 29

EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850 Revision A
PRODUCT DESCRIPTION Control Panel 29
1.5.3 Operations
1.5.3.1 Stand-alone Copy
The functions of this unit caused by each button in stand-alone copy mode are described in the following table.
Table 1-35. Operations
Button
Function
Stand-alone Copy
Power Button • Turn on or off this unit.
Ink Button
• Start or advance ink cartridge (I/C) exchanging procedure.
 Case
 [All
inks are enough.] Move carriage (CR) to I/C exchange position.
 [Ink
low, Ink out, Without I/C error] Move CR to each color's ink check position if that color's I/C is ink low or ink out or without I/C. CR moves in the order of Cyan,
Magenta, Yellow, Black.
 [CR
is in some color's ink check position.] Move CR to next color's ink check position or I/C exchange position.
 [CR
is in I/C exchange position.] Move CR to standby position.
• Invalid while printing, scanning,
cleaning head, stopping printing or copying, exchanging I/C, or in error status except for ink out error, paper out error, index sheet error, PG error.
Ink Button
(
Holding over 3
sec.)
• Start cleaning head procedure.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for paper out error, index sheet error, PG error.
Paper Size Button
• Alternate paper size of “Letter (or A4)” and “4"x6" (or 10x15)”.
• Invalid while printing, scanning, cleaning head, stopping printing
or copying, exchanging I/C, or in error status.
Fit to Page Button
• Alternate “Fit to Page” status and turn on or off the “Fit
to Page” LED.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status.
B&W Start Button
• Start monochrome copy.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in ink out error.
• Load paper in paper out error or double feed err
or and eject paper in paper jam error.
Color Start Button
• Start color copy.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in ink out error.
• Load paper in paper out error or double feed error and eject paper in paper jam error.
Stop Button
• Stop job of copying or printing and reset the number of copies to the beginning.
• Eject paper when paper exists or may exist in the paper
path.
• Invalid while PC scanning, cle
aning head and exchanging I/C.
• Clear some of error status.
B&W Start Button
+ Stop Bu
tton
• Start draft monochrome copy when “Plain Paper” and “Letter (or A4)” are selected.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in ink out error, or without “Letter” or “A4” is selected.
Color Start Button
+ Stop Button
• Start draft color copy when “Plain Paper” and “Letter (or A4)” are selected.
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in ink out error, or without “Letter” or “A4” is selected.