Epson Stylus CX3800 Series

Maintaining Your Epson Stylus CX 21
1. Make sure the Epson Stylus CX is on.
2. Make sure that the document cover is closed, then open the scanner.
3. Press and release the
B ink button. The ink cartridge holder moves to the
check position and the P
On and B ink lights flash. If one of the cartridges is
low or empty, the Epson Stylus CX moves that cartridge to the
_ ink out
mark.
Note:
Don’t hold down the
B ink button for more than 3 seconds, or the printer will start
to clean the print head.
Caution:
Don’t move the print head by hand; this may damage the Epson Stylus CX. Always
press the
B ink button to move the print head.
Caution:
Do not open the scanner
when the document
cover is open.