Copyright © 2006 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX XX.XX-XX XXX
Start Here
1. Unpacking
4. Installing Ink Cartridges
2. Removing Protective Tape
3. Turning On
6. Installing the Software
Note:
The ink cartridges first installed in this product will be partly used to charge the print head.
Subsequent ink cartridges will last for their full rated life.
Do not connect the USB cable until
you are instructed to do so.
o For Windows. No installation screen? & Double-click the CD-ROM icon.
Turn over
Ink Cartridges Power Cord CD-ROM Start Here User’s Guide
Remove Remove all tape Open Remove
Close
Connect
Plug in Turn on
Open Unpack
Install Press (Click) Close (Click) Close
Press
If this screen appears,
click cancel.
Insert
Double-click
For Windows
For Mac OS X
Click
When this screen appears, connect to your PC.
Installation complete.
Follow the instructions.
Follow the instructions.
Shake
5. Ink Charging
Wait about
2 min
Only remove
the yellow tape.
Note:
Do not open the ink cartridge package until you are ready to install it in the printer.
The cartridge is vacuum packed to maintain its reliability.
To Next Page
Need help?
General