Copying 13
R4CE170
Basic Operation Guide
Rev. C
COPY.fm A5 size
4/22/04
R
Proof Sign-off:
R.Matsuda CRE K.Kawakami
H.Kimura
editor name
5. You can change the copy settings, if necessary, by pressing the
illuminating buttons. (When a button lights up, this indicates it
valid.) To change each setting, see “Changing Copy Setting” on page
24.
6. Press the x Color button to copy in color, or the x B&W button to
copy in grayscale.
c
Caution:
Never open the scanner unit while scanning or copying; otherwise, you
may damage this product.
Note:
❏ Do not pull on the paper being copied.
❏ The copied image may not have exactly the same size as the original.
❏ If a message indicating low ink appears on the LCD panel while you are
copying, you can either continue making copies until the ink runs out, or
stop making copies and then replace the ink cartridge.
❏ When you select Glossy or DB Photo as paper type and then press the x
B&W button, an warning message appears and copying stops. If this
happens, press the y Stop button, and then change the paper type setting.
Loading Paper
Note:
❏ The print result is affected by the kind of paper you use. For the best quality,
use the appropriate paper.
❏ To print on an envelope, refer to the Reference Guide.
❏ Keep enough space in front of this product for paper to be fully ejected.
To Next Page
Loading...
