Epson Stylus CX7300 - Copy Photos

Press the ink-changing button Carriage move out Pull out the power line of the printer and
move the carriage to the right side.
Step 3: Remove the cartridge cover
Open the cartridge cover Take out the original cartridges prize the cover lightly along with the gap with
screwdriver
Take one side first. Then take out the whole cover Carriage is empty and get ready for putting in
the new CISS
Step 4: Install CIS Catridges
Move the carriage to the left side Make the cartridge round the printer cover as above show Move the carriage back to the
original position