5
Turn on the printer and press the ‘ink’
button. When the printhead has moved to
the cartridge removal position unplug the
mains cable from the printer.
This allows the printhead to be manually
moved.
Remove any cartridges from the machine.
Remove all the small bungs from the bot-
tles. (
do not throw these away as you will
need these for re-filling the bottles
)
Using the long needle attachment on the
10 ml syringe draw any ink out of the
centre chamber (through the small hole).
Repeat this on each colour then fit the air
filters supplied.
To Next Page
Loading...
