1. Lower the output tray and open the
printer cover.
2. Turn on the printer by
pressing the P power
button.
The print head moves to
the left, which is the ink
cartridge installation
position. The P power
light flashes and the error
light comes on.
c
Caution:
Do not move the print head by hand. Doing so may damage the printer.
3. Push back the release tabs and lift up the ink
cartridge clamps.
4. Open the ink cartridge
packages. Next, remove only
the yellow tape seals from
each cartridge.
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
