14
R4C706
short.bk Rev. E
ROLL.FM A5 size
5/24/01
L
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
c
Caution:
Always use a triangle or other tool to ensure that the end of
the roll is cut perpendicularly. A diagonal cut may cause
paper feed problems.
3. To flatten the roll paper, place it printable-side up between
the pages of the instruction booklet packaged with the roll
paper to protect it. Then, roll the booklet in the direction
opposite of the paper’s curl.
4. Remove the paper support and lower the output tray. Then
turn on the printer.
To Next Page
Loading...
