68
R4C706
short.bk Rev. E
MAINT.FM A5 size
5/24/01
L
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Note:
❏ Print head cleaning uses both color and black ink. To avoid wasting
ink, clean the print head only if print quality declines (for example,
if the printout is blurry or the color is incorrect or missing).
❏ Use the Nozzle Check utility first to confirm that the print head
needs to be cleaned. This saves ink.
❏ When the
b
error light is flashing or on, you cannot clean the print
head. Replace the appropriate ink cartridge first.
❏ Do not start the Head Cleaning or Nozzle Check utility while
printing is in progress, or your printout may be marred.
Follow the steps below to clean the print head using the control
panel buttons.
1. Make sure that the Processing light is on and that the
b
error
light is off.
Note:
If the
b
error light is flashing or on, you cannot clean the head and
this operation will start the ink cartridge replacement procedure. If
you do not want to replace an ink cartridge at this moment, press
the
b
maintenance button to return the print head to its home
position.
2. Hold down the
b
maintenance button for three seconds.
To Next Page
Loading...
