71
R4C706
short.bk Rev. E
MAINT.FM A5 size
5/24/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
1. Open the printer cover and make sure that the print head is
in the home (far right) position. If not, plug in the printer, wait
until the print head returns to the home position, then close
the printer cover and unplug the printer.
c
Caution:
Leave the ink cartridges installed when you transport the
printer. Transporting the printer without cartridges in place
can damage the printer.
2. Disconnect the interface cable from the printer.
3. Remove the paper from the sheet feeder and remove the paper
support.
4. Open the printer cover again. Secure the ink cartridge holder
to the printer with tape as shown below, then close the printer
cover.
5. Raise the output tray.
6. Attach the protective materials to both sides of the printer.
7. Repack the printer and power cord in the original box.
8. Keep the printer level during transport.
To Next Page
Loading...
