52 Printing on Roll Paper, CDs, DVDs, and Card Stock
You see the following:
5. Select Print Position Confirmation (or Check) Pattern and
click OK. The confirmation pattern is printed on the check
disk or CD.
6. Remove the check disk or CD and measure the distance from
the edge of the hole to the small cross marks (distances
labeled A and B as shown). You’ll need a millimeter ruler for
these measurements.
7. Open the File menu and select Adjust Print Position.
Macintosh
Windows
Select this setting
Macintosh
Windows
Enter measurements here
sp960basics.book Page 52 Friday, January 17, 2003 2:39 PM
To Next Page
Loading...
