To Next Page
J
Jennifer FisherAug 18, 2025
Why does my Epson Printer say 'No Ink Cartridge'?
- JJordan RollinsAug 18, 2025
This error appears when the ink cartridge is either not installed or not positioned correctly.
Why does my Epson Printer say 'No Ink Cartridge'?
This error appears when the ink cartridge is either not installed or not positioned correctly.
What causes a Paper Out Error on my Epson Stylus Photo R220 Printer?
This error is detected when the PE Sensor does not detect the top of the paper during loading.
How to resolve Defective Print Quality issues on my Epson Stylus Photo R220 Printer?
If you are experiencing defective print quality, remove any foreign matter from the sealing rubber in the ink system.
What does a CD/DVD Tray Error mean on my Epson Stylus Photo R220 Printer?
This error is detected when the CD/DVD Tray cannot be detected after attempting to print on a CD or DVD.
What does 'Ink Low Condition' mean on my Epson Printer?
This error appears when the ink consumption reaches 90%.
How to fix a Paper Jam Error on my Epson Stylus Photo R220 if the cause is PF Motor?
To resolve a Paper Jam Error caused by the PF Motor, replace the PF Motor.
What to do if my Epson Printer is making an Abnormal Sound?
If you notice an abnormal sound, check if there is enough grease on the CR Guide Shaft of the Carriage Unit.
What causes a CD/DVD Guide Error on my Epson Stylus Photo R220 Printer?
This error can occur in several situations: when paper is present in the ASF Assy and the CDR Guide Assy is open while receiving print data; when the CDR Guide Assy opens while printing; when the CDR Guide Assy is open while receiving ASF paper feed data; or when attempting to replace the ink while the CDR Guide Assy is open.
How to fix 'Multi-feed Occurs without LED/STM3 Error Notifications' on my Epson Stylus Photo R220 Printer?
To fix multi-feed issues, reassemble the Extension Spring, 0.45 on the back of the Roller, Retard Assy related to the ASF Assy.
What does the 'Maintenance Request' error mean on my Epson Stylus Photo R220 Printer?
This error is detected when the Value of the Protection Counter A set in EEPROM reaches its limits (Variable between 20000 and 46750 points).
Printing Technology| printing technology | 6 color (CcMmYK) advanced Micro-Piezo |
|---|---|
| ink type | 6-color dye based |
| maximum resolution | 5760 x 1440 optimized dpi |
Print Speed and Capacity| black print speed | up to 15 ppm |
|---|---|
| color print speed | up to 15 ppm |
| 4" x 6" borderless photo print speed | as fast as 57 sec |
Paper Handling| maximum printable area | 8.5" x 44" |
|---|---|
| top/bottom margin | 0" |
| left/right margin | 0" |
Connectivity and Compatibility| connectivity | USB 1.1 (front/back) for PC connectivity only |
|---|---|
| operating systems - windows | 98SE, 2000, Me and XP |
| operating systems - macintosh | OS X 10.2.4 or later |
Weight and Dimensions| storage dimensions (W x D x H) | 18.5" x 10.5" x 7.8" |
|---|---|
| printing dimensions (W x D x H) | 18.5" x 19.0" x 11.9" |
| weight | 11.4 lb (without ink cartridges) |
Provides an introduction to troubleshooting methods, covering unit and component levels.
Details error detection using printer LEDs and Status Monitor 3 messages.
Guides users in identifying specific unit and component failures and their causes.
Introduces the procedures for disassembling and reassembling printer components.
Highlights critical precautions for maintaining printer quality during disassembly/reassembly.
Provides step-by-step instructions for dismantling various printer units and parts.
Lists and explains the necessary adjustments after component replacement or reassembly.
Details procedures for performing adjustments using the specialized servicing software.
Explains manual adjustment procedures that do not require the servicing program.
Provides essential information and procedures for maintaining the printer's optimal condition.
Outlines cleaning steps for key printer components, focusing on the print head and rollers.
Describes actions for resolving print irregularities and handling maintenance request errors.
Specifies the types, amounts, and locations for applying lubricant during maintenance.
Presents visual exploded diagrams of printer parts for identification and reference.
Contains a comprehensive list of all printer parts with their corresponding codes and names.
Includes schematic diagrams for the main board, power board, and panel board.
