Epson Stylus Photo R220 - Printer Mechanism;Housing, Lower Removal

EPSON Stylus Photo R220/R230 Revision A
DISASSEMBLY / ASSEMBLY Disassembly 69
2.3.12 Printer Mechanism/Housing, Lower Removal
 External View
Figure 2-32. Printer Mechanism/Housing, Lower Removal
 Parts/Units which should be removed before removing the Printer
Mechanism/Housing, Lower.
Paper Support Assy./Housing (left/right)/Housing, Frame/ASF Assy./
Holder, Shaft Assy./Main Board Assy.
 Disassembly Procedure
1. Remove the three screws that secure the Paper Guide, CDR.
2. Remove the five screws that secure the Printer Mechanism to the Housing,
Lower.
3. Release the four tabs that secure the Printer Mechanism to the Housing, Lower
and remove the Printer Mechanism upward.
C.B.P. 3x8 (5-7kgf.cm)
C.B. 3x6 (5-7kgf.cm)
Paper Guide, CDR
2 1 3
C.B.P. 3x10 (6-8kgf.cm)
C.B.S. 3x6 (6-8kgf.cm)
5
4
Screw, Frame, Main (6-8kgf.cm)
2
C.B.P. 3x10 (6-8kgf.cm)
Tab (Under the Tube)
1
3
Tab
Tab
Tab
Left Side of the Printer
Right Side of the Printer