Epson Stylus Photo R220 - APG Assy. Removal

EPSON Stylus Photo R220/R230 Revision A
DISASSEMBLY / ASSEMBLY Disassembly 62
2.3.9 APG Assy. Removal
 External View
Figure 2-22. APG Assy. Removal
 Parts/Units which should be removed before removing APG Assy.
Paper Support Assy./Housing (left/right)/Housing, Frame/ASF Assy./Main Board
Assy.
 Disassembly Procedure
1. Remove the screw that secures the APG Assy. to the Frame, Main, and
remove the assy. avoiding contact with the Frame, Main.
C.B.S. 3x6 (6-8kgf.cm)
APG Assy.
Left Rear Side
 When reinstalling the APG Assy.
 Make sure that the two tabs and the two dowels are securely
installed to the Frame, Main.
 Check if the part indicated in Figure2-23 is inserted in the
slits of the Frame, Main.
Figure 2-23. APG Assy. Installation
APG Assy.
Insert this into the
slit of the Frame,
Main.
Dowels
Tabs