Epson Stylus Photo R220 Start Here

Unpack
1 If any of these items are missing, contact Epson
®
as described on
the back of this sheet.
2 Remove all of the exterior tape.
3 Flip open the paper support and pull up the extension. Lift the
printer cover, then open the output tray and pull out the extension.
4 Remove the tape from the ink cartridge holder and CD/DVD
tray guide.
1
Turn On the Printer
1 Connect the power cable.
2 Press the power button.
2
Load Paper
1 Slide the edge guide to the left.
2 Load the paper under the tab against the right edge guide.
3 Slide the left edge guide over.
4
4 Insert the cartridges in the holder for each color.
5 Press the cartridges down until they click.
6 Close the ink cartridge cover. Make sure it clicks into place.
7 Close the printer cover.
8 Press the ink button to charge ink. Charging takes about
2 minutes.
Start Here
Epson Stylus
®
Photo R220
Please read these instructions before using the printer.
Letter 4 x 6 in
Power cord
Small CD insert
CD/DVD tray
CD position
check disk
Ink cartridges
Printer
Software
CD-ROM
Printer Basics
Install Ink Cartridges
1 Open the printer cover.
2 Open the ink cartridge cover.
3 Unpack the ink cartridges.
3

Epson Stylus Photo R220 Specifications

Printing Technology

printing technology	6 color (CcMmYK) advanced Micro-Piezo
ink type	6-color dye based
maximum resolution	5760 x 1440 optimized dpi

Print Speed and Capacity

black print speed	up to 15 ppm
color print speed	up to 15 ppm
4" x 6" borderless photo print speed	as fast as 57 sec

Paper Handling

maximum printable area	8.5" x 44"
top/bottom margin	0"
left/right margin	0"

Connectivity and Compatibility

connectivity	USB 1.1 (front/back) for PC connectivity only
operating systems - windows	98SE, 2000, Me and XP
operating systems - macintosh	OS X 10.2.4 or later

Weight and Dimensions

storage dimensions (W x D x H)	18.5" x 10.5" x 7.8"
printing dimensions (W x D x H)	18.5" x 19.0" x 11.9"
weight	11.4 lb (without ink cartridges)