Epson Stylus Photo R220 - Paper Guide, Front;Roller EJ Assy. Removal

EPSON Stylus Photo R220/R230 Revision A
DISASSEMBLY / ASSEMBLY Disassembly 76
2.3.16 Paper Guide, Front/Roller EJ Assy. Removal
 External View
Figure 2-44. Paper Guide, Front/Roller EJ Assy. Removal (1)
 Parts/Units which should be removed before removing the Paper Guide,
Front/Roller EJ Assy.
Paper Support Assy./Housing (left/right)/Housing, Frame/ASF Assy./
Holder, Shaft Assy./Main Board Assy./APG Assy./Print Head/Carriage Unit/
Printer Mechanism/CDR Guide Assy./Ink System Unit
 Disassembly Procedure
1. Release the tab of the Link EJ, Right from the groove of the Guide, Shaft,
Frame EJ, Right and remove the Link EJ, Right.
2. Remove the Flat Washer which secures the right side of the Frame EJ Assy.
3. Remove the PF Timing Belt and the Flat Washer from the Spur Gear, 37.242,
then remove the Spur Gear 41.48.
4. Remove the Compression Spring, 1.27 and the Holder, Idle Roller together
with the PF Timing Belt.
5. First slide the Frame EJ Assy. toward the left, and then Slide the Frame EJ
Assy. toward the right and remove it as shown in Figure2-44.
6. Remove the Flat Washer which secures the Link EJ, Left, and then slide the
Link EJ, Left slightly to the right side.
7. Remove the Extension Spring, Push Up, Plate, Left from the both tabs of the
Guide, Shaft, Frame EJ, Left and the Frame, Main.
8. Release the tabs which secure the Guide, Shaft, Frame EJ (left/right) and
remove the Guide, Shaft, Frame EJ (left/right).
Compression Spring, 1.27
Holder, Idle Roller
Spur Gear, 41.48
PF Timing Belt
Spur Gear, 37.242
Flat Washer
Link EJ, Right
Guide, Shaft, Frame EJ, Right
Tab
12
Frame EJ Assy.
Tabs
Tabs
Guide, Shaft,
Frame EJ, Left
Link EJ, Left
Flat Washer
Extension Spring,
Push Up, Plate, Left
Tabs
C A U T I O N
 When removing the Frame EJ Assy., be careful not to damage or
transform the Star Wheels of the Frame EJ Assy.