Epson Stylus Photo R220 - Page 77

EPSON Stylus Photo R220/R230 Revision A
DISASSEMBLY / ASSEMBLY Disassembly 77
 External View
Figure 2-45. Paper Guide, Front/Roller EJ Assy. Removal (2)
9. Release the tab which secures the Paper Guide, Front to the Frame, Main and
remove it.
10. Remove the Grounding Spring EJ (left/right) from the Roller EJ Assy.
11. Release the dowels of both left and right Bushing,5 which secure the Roller
EJ Assy., then turn them in the direction of the arrow.
12. Slide the right Bushing 5 to the right side and remove it. Then pull out the
Roller EJ Assy. through the left side of the Frame, Main, and remove it from
the right of the Frame, Main.
Paper Guide, Front
PF Roller Assy.
Tab
Roller EJ Assy.
Rubber Rollers
Right Side of the Printer
Bush, 5
Bush, 5
Left Side of the Printer
Dowel
Grounding Spring EJ, Right
Grounding Spring EJ, Left
Dowel
C A U T I O N
 When Not replacing the Porous Pad, Paper Guide, Front and the
Porous Pad, Paper Guide, Front Support, be careful not to touch
or bend them shown in Figure2-46
Figure 2-46.
Porous Pad, Paper Guide, Front and
Porous Pad, Paper Guide, Front, Support
C A U T I O N
 Do not damage the rubber rollers when removing the Roller EJ
Assy.
Porous Pad, Paper Guide, Front
Porous Pad, Paper Guide, Front
Porous Pad, Paper Guide, Front