Epson Stylus Photo PX800FW - Page 28

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Revision C
PRODUCT DESCRIPTION
Interface
https://www.manualsbooks.com
23
Confidential
1.5 Interface
The following is the specifications of the USB Interface, Network Interface, FAX
Interface (Only Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW), and
Memory Card Slot mounted on this printer.
1.5.1 USB Interface
The table below describes the specifications of the two USB ports; USB device port for
connecting with a host such as a computer, and the USB host port for connecting with
an external devices such as a DSC (digital still camera).
Table 1-13. USB Interface Specifications
Item
USB Device port
USB Host port*
Compatible standards
• Universal Serial Bus
Specifications Revision 2.0
• Universal Serial Bus Device
Class Definition for Printing
Devices Version 1.1
• Universal Serial Bus Mass
Storage Class Bulk-Only
Transport Revision 1.0
• Universal Serial Bus
Specifications Revision 2.0
Transfer rate
480 Mbps (High Speed)
480 Mbps (Max.)
Data format
NRZI
Compatible connector
USB Series B
USB Series A
Max. cable length
2 [m] or less
Note* : The following devices can be connected to the USB Host port.
• Devices compliant with DPS Version 1.0/1.1 (PictBridge)
• Devices compliant with Universal Serial Bus Mass Storage Class Bulk-Only Transport
Revision 1.0, and the Subclass code is one of the followings.
0x06 (SCSI transparent command set)
0x05 (SFF-8070i command set)
0x02 (SFF-8020i command set)
Table 1-14. Device ID
Note : The “ Model Name” is replaced as shown in the following table.
Table 1-15. Model Names Indicated in the Device ID
Destination
Model Name
Epson Artisan 800/
Epson Stylus Photo
PX800FW/TX800FW
Epson Artisan 700/
Epson Stylus Photo
PX700W/TX700W
North America
Artisan 800
Artisan 700
Euro
Stylus Photo PX800FW
Stylus Photo PX700W
Asia/Pacific
Stylus Photo TX800FW
Stylus Photo TX700W
1.5.2 FAX Interface (Only Epson Artisan 800/Epson
Stylus Photo PX800FW/TX800FW)
Port Name
Connector
Description
Line port
RJ11
Connects to phone cable from modular wall jack.
EXT port
RJ11
Connects to TAM or Telephone.
1.5.3 Network Interface
Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/
Epson Stylus Photo PX700W/TX700W can be connected to the network via Wired
or Wireless LAN connection. (They can not be used simultaneously.) The
following describes each Interface.
 Wired LAN
The following interface is equipped for the Wired LAN connection. The
communication mode can be selected from auto setting or fixed setting.
Table 1-16. Wired LAN
Item
Content
Connector
RJ-45 receptacle*: 1 port
Communication Speed
For either 10Base-T or 100Base-TX, the Full Duplex or Half
Duplex can be selected.
Note* : 10Base-T/100Base-TX Ethernet is supported. MDI/MDI-X is selected automatically.
When IEEE 1284.4 is Enabled
When IEEE 1284.4 is Disabled
@EJL<SP>ID<CR><LF>
@EJL<SP>ID<CR><LF>
MFG:EPSON;
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX,ESCPR1;
CMD:ESCPL2,BDC,ESCPR1;
MDL:Model Name;
MDL:Model Name;
CLS:PRINTER;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
DES:EPSON<SP>Model Name;