Epson Stylus Photo PX800FW - Page 30

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Revision C
PRODUCT DESCRIPTION
Interface
https://www.manualsbooks.com
25
Confidential
1.5.4 Memory Card Slots
Table 1-21. List of Supported Memory Card
Priority
Slot
Compatible memory card
Standard
Max.
capacity
Remarks
1
Memory Stick/
Memory Stick
PRO
Memory Stick“ MemoryStick Stand
ard” Format Specification Ver.1.43-00 compatible 128MB
Includes versions with memory select function
MagicGate Memory Stick
128MB
Copy protection function is not supported
MagicGate Memory Stick Duo
An adapter should be used
Memory Stick PRO
MemoryStick PRO Format Specifications-without security specifications Ver.1.02-00
compatible
32GB
Copy protection function is not supported
Memory Stick Duo
MemoryStick Duo Format Specification Ver.1.11-00 compatible
The Memory Stick Duo adapter should be used
Memory Stick Pro Duo
MemoryStick PRO Duo Format Specification Ver.1.02-00 compatible
The Memory Stick Duo adapter should be used.
Memory Stick micro
Memory Stick Micro Format Specification Ver.1.02-00 compatible
The Memory Stick adapter for standard size
should be used.
SD/MMC
SD (Security Digital)
SD Memory Card Specifications / PART1. Physical Layer Specification Ver. 2.0
compatible
2GB
miniSD/microSD
The SD adapter should be used
SDHC
32GB
Speed Class is not supported
miniSDHC/microSDHC
The SD adapter should be used
Speed Class is not supported
MultiMediaCard
MultiMediaCard Plus
MultiMediaCard Standard Ver. 4.2 compatible
4GB/32MB
Only MultiMediaCard Plus supports up to
32GB.
xD-Picture card
xD-Picture card
xD-Picture Card Specification Ver.1.20 compatible
2GB
Type M/H supported
2
CF Type II
Compact Flash
CF+ and CompactFlash Specification Revision 2.1 compatible
32GB
True-IDE compatible memory card only
Microdrive
Note:• Memory Stick/PRO, SD/MMC and xD-Picture Card shares the same slot.
• When cards are inserted in the two slots at once, the slot which will be accessed first is determined according to the priority shown in the table.
• To select a card that has been inserted in a non-active slot, first remove the card in the active slot.
• In memory card direct printing mode, the image files in the active slot are valid and have assigned frame numbers. The number of images will not change if a card is inserted in another
nonselected slot.
• When the card inserted in the slot is accessed from the PC, only one drive is displayed at a time as a removable disk* and only the card that is in the active slot can be accessed via the
removable disk. A card that has been inserted into a non-selected slot cannot be accessed.
(This is for Windows. For Macintosh, the card in the active slot will be mounted on the desktop.)
• Does not support 5V type of memory cards.
• When a memory card is being accessed, do not touch the memory card.
• For detailed information on the supported file system and formatting the memory card, refer to “ 1.7.2 Memory Card Direct Print Function (Photos Mode) ( p. 32 ) ” .
� � � �
� � �
If you insert a Memory Stick DUO to the Memory Card Slot
without using the adapter, make sure to turn off the printer first,
then remove the card using tweezers.