6 Feed the paper up to the line on the tray. Make sure the paper is flush
against the right.
7 Press the OK button. The paper loads inside the printer.
8 When you see a message on the screen, close the manual feed tray.
Push it in until it latches.
9 Extend the output tray.
4120369 Rev.0
1-B C
4120369 Rev.0
1-B M
4120369 Rev.0
1-B Y
4120369 Rev.0
1-B K
Need paper and ink?
Try Epson paper with Epson UltraChrome K3
®
ink for professional results. For
the right supplies at the right time, you can purchase them at Epson Supplies
Central at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian
sales). You can also purchase supplies from an Epson authorized reseller. To
fi nd the nearest one, call 800-GO-EPSON (800-463-7766).
Genuine Epson Paper
Epson offers a wide variety of papers to meet your needs; visit Epson Supplies
Central for more information.
Ultra Premium Photo Paper Luster
Instant-drying RC photo paper for vivid, lifelike images that
rival those of traditional silver halide prints. Its semigloss “E”
surface and 10 mil thickness provide a true photographic look
and feel.
Genuine Epson Inks
Photo Black
Photo Noir
15 7
®
Look for the numbers below to fi nd your
cartridges. It’s as easy as remembering your
number!
Epson Stylus Photo R3000 Series Ink Cartridges
Color Part number
Light Light Black
157
Light Black
157
Photo Black
157
Matte Black
157
Vivid Light Magenta
157
Vivid Magenta
157
Light Cyan
157
Cyan
157
Yellow
157
Install software
1 Make sure the printer is NOT CONNECTED
to your computer.
Windows
®
: If you see a Found New
Hardware screen, click Cancel and
disconnect the USB cable. You can’t
install your software that way.
2 Insert your product CD.
Windows: If you see the AutoPlay window,
click Run Setup.exe. If you see the User
Account Control screen, click Yes or Continue.
Macintosh
®
: Double-click the Epson icon.
3 Windows: Click Install and follow the on-screen instructions.
Macintosh: Select the items you want to install, then click Install.
Tip: Be sure to install the professional print samples. When you're
done with the installation, you can test your printer's output in both
color and black-and-white.
6
5
Choose your connection
You can connect your printer to your existing network (wireless or wired) or
directly to your computer using a USB cable (not included). See below for
details on each connection method.
Wireless Connection (802.11n)
You must install the software on every computer from which you want
to print. For the first installation, we recommend using a USB cable (not
included) to simplify wireless setup. After the printer is connected to the
network, you will be prompted to remove the cable.
If you’re using Mac OS
®
X 10.6 or don’t have a USB cable, you will need to
use the control panel on the printer to select wireless settings.
Make sure you know your network name (SSID) and network password:
• Network name
• Network password
If you don’t have this information, contact the person who set up your
network.
Note: For optimal print speed, your wireless router and/or laptop must
conform to the 802.11n standard. Earlier standards (802.11a/b/g) are not
supported.
Direct USB Connection
Make sure you have a USB cable (not included). Do not connect the printer
to your computer until you’re instructed to do so.
Wired Ethernet
®
Connection
Make sure you have an Ethernet network cable (not included). You must
install the software on every computer from which you want to print.
Epson, Epson Stylus, and Epson UltraChrome K3 are registered trademarks, Epson Exceed Your Vision is a registered logomark, and
Supplies Central is a service mark of Seiko Epson Corporation.
Signature Worthy and UltraSmooth are registered trademarks and Designed for Excellence is a trademark of Epson America, Inc.
General Notice: Other product names used herein are for identifi cation purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2010 Epson America, Inc. 11/10 CPD-28172R1
Printed in XXXXXX
Any questions?
Network Setup
Follow the on-screen instructions when you insert your product CD. If you
need additional help, see the printed Basics guide. You can also watch a
video tutorial at: epson.com/support/wireless.
Basics Guide
Basic instructions for loading paper, printing, maintenance, and
network setup.
On-screen help with your software
Select Help or ? when you’re using your software.
User’s Guide
Click the shortcut on your desktop (or in the Applications/Epson Software/
Guide folder on Macintosh) to access the online User’s Guide, software
downloads, Epson Supplies Central
SM
, and more (requires an Internet
connection).
Epson Technical Support
Visit epson.com/support/r3000 (U.S.) or epson.ca/support/r3000 (Canada)
where you can download drivers, view manuals, get FAQs, or e-mail Epson.
You may also speak with a support specialist by calling:
• U.S.: (562) 276-7272, 6 AM to 8 PM, Pacifi c Time, Monday through
Friday, and 7 AM to 4 PM Saturday
• Canada: (905) 709-2567, 6 AM to 8 PM, Pacifi c Time, Monday through
Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name.
• If you see a fi rewall alert message, click Unblock or Allow to let setup
continue.
• If your network has security enabled, make sure you enter your
network password (WEP key or WPA passphrase) correctly. If it has
uppercase (ABC) or lowercase (abc) letters, make sure you enter them
correctly.
Function buttons
Press , , , or on the printer to highlight a letter or function
button on the screen. Press to select it.
Use the function buttons to select uppercase (AB12), lowercase (ab12),
symbols (!#%@), or spaces (
), or to delete characters ( ).
When you’re fi nished, highlight Done and press OK.
The printer’s LCD screen is dark.
Press any button to wake the printer from sleep mode.
Setup is unable to find my printer after connecting it with a
USB cable.
Make sure it is securely connected as shown:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
