Revision Status
Revision Date of Issue Description
A August 10, 2006 First Release
B September 12, 2006 Chapter 1
1.7.5 Dimensions (p.22) are changed.
Chapter 2
2.2.1 Main Features (p.26) of C658Main Board is modified.
2.2.3 Circuit Block Diagram (p.28): error correction
Chapter 3
3.2.1 Error Indication Method (p.33): EPSON Status Monitor 3 error messages are changed.
3.3.1 Troubleshooting Problems with Error Messages (p.36) is modified. (CR Encoder)
3.4.4 Problems with Interfaces (p.55): Troubleshooting Memory Card are modified.
Chapter 4
4.1.4 Work Completion Checklist (p.59): Protection for Transportation is added.
4.1.10 Disassembly/Assembly Procedures (p.64): the disassembly flowchart is modified.
4.2.5 Upper Housing (p.68): the order of tighteing screws is corrected.
4.2.9 Front Housing (p.73) reassembly procedure is modified.
4.3.1 Removing the USB Board (R260/R265/R270 only) (p.76): Cable Holder is corrected to "FFC Holder".
4.3.3 Disassembling the Main Board Unit (p.80): the reassembly procedure is modified.
4.3.4 Removing the Card Board (R360/R380/R390 only) (p.82):
the procedure is moved after Main Board removal/disassembly procedure.
4.5.3 Printhead (p.91): the caution on removal is modified.
4.5.6 Stacker Assy (p.95): the caution on reinstallation is corrected.
Chapter 5
5.1.1 Servicing Adjustment Item List (p.113) is modified.
5.1.2 Replacement Part Adjustment Items (p.116) is modified.
5.2.1 Top Margin Adjustment (p.118): error correction.
5.2.2 Head angular adjustment (p.118) sample pattern is modified.
5.2.4 PW Adjustment/First Dot Adjustment (p.120): error correction.
5.2.6 PG Adjustment (p.122) judging standard is corrected.
Chapter 6
6.1.3 Lubrication (p.131): Grease G-77 EPSON code is added.
To Next Page
Loading...
