Epson Stylus Photo RX500 - Replacing an Ink Cartridge

72 Replacing Ink Cartridges
Replacing an Ink Cartridge
Follow the steps below to replace ink cartridges.
Note:
Before replacing an ink cartridge, read “Precautions on Ink Cartridge
Replacement” on page 70 and “When handling ink cartridges” on page 10.
1. Make sure this product is on.
2. When the ink is empty:
Refer to the LCD panel message to see which ink cartridge is
empty, and then press the x Color button.
When the ink is low:
Press the Setup Mode button to enter the Setup Mode and press
the A button repeatedly until 4.Ink cartridge appears on the
LCD panel, and then press the x Color button.
The ink cartridges move to the replacement position.
Press the Start...
A
C
B
D
4.Ink cartridge