Loading Paper 13
3. Extend the output tray.
4. Load your paper and slide the edge guide lightly against it. Never load more
sheets than can fit under the arrow mark on the edge guide.
Note:
If you’re using Epson paper, follow any instructions that came with it. For example,
some types of paper should be loaded only one sheet at a time. See your on-screen
Reference Guide for details.
To ensure good results, always:
■ Load paper short edge first.
■ Load paper with the printable side up (it’s usually whiter or brighter).
■ Check the RX700’s Paper Type setting before printing to make sure it matches the
type of paper you’ve loaded (see page 16).
To Next Page
Loading...
