Epson Stylus Pro 10000 Archival Ink - Page 164

-6
6 | Index
Resolution
Macintosh, 3-10
maximum, A-1
Windows, 4-8
RIP software, ordering, 2
Roll Marg setting, 5-8, 7-7
Roll paper
attaching to spindle, 1-4
Auto Cut, 3-3, 4-7
Auto Rotate, 3-3, 4-7
belts, 2-7 to 2-8
cannot be cut, 7-8
cutting manually, 2-9
feed problems, 7-9 to 7-10
loading, 1-4 to 1-9
Page Line setting, 2-9, 3-3, 4-7
printable area, A-5
removing from spindle, 2-8
Save Roll Paper setting, 3-3, 4-7
setting default margins, 5-8 to 5-9
settings, Macintosh, 3-3
settings, Windows, 4-7
specifications, A-4
trim lines, 2-9, 3-3, 4-7
S
Safety
approvals, A-3
instructions, 7 to 9
Saturation setting, 3-13
Save Roll Paper setting, 3-3, 4-7
SelecType menus
Cutter Replace, 6-11
Head Alignment, 6-5
list, 5-8
Paper Configuration, 2-18 to 2-19
Printer Setting, 2-9, 2-13,
5-8 to 5-11
Printer Status, 5-4
Test Print, 5-3
Sharing printer, 1-16 to 1-24
Slow printing, 7-8
Smooth Fine Art Paper, 2-4
Software
installing, 1-13 to 1-16
uninstalling, 7-12 to 7-13
Specifications
electrical, A-3
environmental, A-2
initialization, A-3
ink cartridges, A-5 to A-6
mechanical, A-2
paper, A-4
parallel interface, A-7
printable area, A-5
printer, A-1 to A-3
USB interface, A-8
Speed and Progress utility,
4-16 to 4-17
Spindle
ordering, 2
removing roll paper, 2-8
Spool folders, 3-18 to 3-19, 4-16
Spool Manager, 4-12
sRGB setting, 4-3, 4-9
Stabilizer knobs, 6-18
Status check, 5-3
Status messages, 5-2
Status Monitor
Macintosh, 3-17
Windows, 4-12 to 4-13
Storing printer, 6-15 to 6-17
Support, EPSON, 4 to 5
System requirements, 5 to 6
T
Technical support, 4 to 5
Temperature requirements, A-2
Test Print menu, 5-3
Text/Graph setting, 3-5, 4-3
Transporting printer, 6-15 to 6-18
Trim lines, printing
control panel, 2-9
Macintosh, 3-3
Windows, 4-7