What to do if my Epson Stylus Pro 10600 does not turn on?
If your Epson printer doesn't turn on, ensure the power cord is securely plugged into the printer and that the outlet works and isn't controlled by a switch or timer. Also, make sure the voltage supplied to the printer matches the rating voltage labeled on it. If it doesn't, turn off the power and unplug the power cord immediately.
What to do if my Epson Stylus Pro 10600 Printer says 'UNABLE TO PRINT'?
If your Epson printer displays 'UNABLE TO PRINT', it could be due to several reasons: * If you were printing a test pattern during an error or with the ink compartment cover open, wait 3 seconds for the message to disappear, then press the Pause button to exit SelecType mode. Clear any errors and try printing the test pattern again. * The ink cartridge(s) may be empty. Replace the ink cartridge(s) as indicated by the lights. * The ink cartridge(s) may not be installed. Install ink cartridge(s) as indicated by the lights. * The wrong ink cartridge(s) may be installed. Use the correct ink cartridge(s). * The wrong I/F card may be installed. Install the correct I/F card after turning off the power.
General| Internal memory | 128 MB |
|---|---|
| Country of origin | China |
| Minimum system requirements | Microsoft Windows 95/ 98/ NT4.0/2000/ME/XP Macintosh 8.1 or later Microsoft Windows 95/ 98/ NT4.0/2000/ME: Pentium II 400MHz or higher processor, 128MB or more available internal memory, 500MB or more free disk space Macintosh: PowerPC G4 400MHz or faster, Mac OS 8.1 or later, 20MB or more of available internal memory, 500MB or more free disk space. |
| Color | Yes |
| Maximum resolution | 1440 x 720 DPI |
| Operating relative humidity (H-H) | 20 - 80 % |
| Recommended operating temperature range (T-T) | 10 - 35 °C |
| Power requirements | AC 220V - 240V |
| Power consumption (typical) | 131 W |
| Sustainability certificates | ENERGY STAR |
| Package depth | 1975 mm |
| Package width | 700 mm |
| Package height | 1190 mm |
| Package weight | 190000 g |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Dimensions (WxDxH) | 1865 x 680 x 1222 mm |
|---|
Essential guidelines for safe printer operation and setup.
Explanation of control panel buttons, status lights, and LCD messages.
Steps to access and configure printer settings via the driver for Windows and Macintosh.
Procedures for replacing ink, checking ink levels, and cleaning the printer.
Diagnosing and resolving errors, power, and connectivity problems.
To Next Page
