-237
Using Optional Product
Using the Auto Take-up Reel Unit
When you want to print your data on roll paper and don’t want
to cut it or feed it out onto the floor, you can use this optional Auto
Take-up Reel Unit to roll up your print out.
See the Auto Take-up Reel Unit User’s Guide for installing the unit
onto your printer.
Note:
❏ When using the Auto Take-up Reel Unit, be sure to set the Auto
Cut setting to off (at the printer control panel and printer driver).
See “Auto Cut” for Windows or “Auto Cut” for Macintosh.
❏ You can use the Auto Take-up Reel Unit while setting the paper
basket in the feeding paper backward position (up to B1 size;
landscape).
Control box
The control box is on the drive unit attached to the lower right
side of the printer.
To Next Page
Loading...
