Epson Stylus Pro 10600 - Print Output and Quality Problems

-256
Printer port setting does not match the printer
connection port
If you use Windows, select the printer port as described below.
For Windows Me, 98, or 95
1. Click Start, point to Settings and select Printers.
2. Right-click EPSON Stylus Pro 10600 UC (for UltraChrome ink
users), EPSON Stylus Pro 10600 CF (for ColorFast ink users),
or EPSON Stylus Pro 10600 DYE (for dye ink users) in the
Printers window, then select Properties.
3. Click the Details tab.
4. Make sure that your printer driver is selected in the Print using
the following driver list. Then select the port to which your
printer is connected in the Print to following port list.
For Windows 2000 or NT 4.0
1. Click Start, point to Settings and select Printers.
2. Right-click EPSON Stylus Pro 10600 UC (for UltraChrome ink
users), EPSON Stylus Pro 10600 CF (for ColorFast ink users),
or EPSON Stylus Pro 10600 DYE (for dye ink users) in the
Printers window, then select Properties.
3. Click the Ports tab.
4. Make sure that your printer port is selected.
For Windows XP
1. Click Start, and open Printers and Faxes.
2. Right-click your printer's icon, then open the Properties.