-23
Standards and Approvals
The printer mechanism is set to its initial state.
The input data buffer and print buffer are cleared.
The printer returns to the default condition last set.
Software initialization when the ESC@ (initialize the printer)
command is received:
The print buffer is cleared.
The printer returns to the default condition last set.
Panel button initialization by pressing the Pause button on the
control panel for 3 seconds, or *INI signal is send:
Print head capping occurs.
Paper is ejected, if any.
The input data buffer and print buffer are cleared.
The printer returns to the default condition last set.
Safety UL 1950
CSA 22.2 No. 950
Low Voltage Directive 73/23/EEC
EN 60950
EN 60825
EMC FCC part 15 subpart B class A
CSA C108.8 class A
AS/NZS 3548 class A
EMC Directive 89/336/ECC
EN 55022 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
To Next Page
Loading...
