-67
SelecType Settings
When to use SelecType
The SelecType mode enables you to make printer settings similar
to those you would normally make in the driver or software, as
well as other additional settings—directly through the control
panel. Keep the following points in mind when making SelecType
settings:
❏ Application programs may send commands to the printer that
override SelecType settings. If you are not getting the results
you expect, check your application settings.
❏ To see the current SelecType settings, print a status sheet.
SelecType menu list
Menu Item Parameter
“PRINTER SETTING
MENU”
“PLATEN GAP” NARROW, STANDARD,
WIDE
“PAGE LINE” ON, OFF
“INTERFACE” AUTO, PARALLEL, USB,
OPTION1, OPTION2
“CODE PAGE” PC437, PC850
“ROLL MARG” T/B15mm, 3mm,
15mm
“PAPER SIZE CHK” ON, OFF
“PAPER ALIGN CHK” ON, OFF
“INIT. SETUP” EXEC
To Next Page
Loading...
