-174
Orientation
Use this setting to specify the direction of printing on the page:
Portrait (vertical), or Landscape (horizontal). If you need to print
close to the bottom of the page, click Rotate by 180°.
Reduce or Enlarge
Lets you define the percentage you want to enlarge or reduce on
image. Make setting from 25 to 400%. This setting is available only
for sheets.
Roll Paper Option
Note:
When Sheet is selected from the Paper Source list, the Roll Paper Settings
(Auto Rotate, Auto Cut, and Print Page Line) are not available.
Auto Rotate
The Auto Rotate function is effective only when the print data
length is shorter than the printable width of the roll paper (300,
400, or 600 mm, 12, 14, 20, 22, 24, 36, or 44 inches). The print data
will automatically be turned 90 degrees to print crosswise, saving
roll paper. This function is not available when Roll Paper (Banner)
is selected from the Paper Source list.
Original Auto Rotate onAuto Rotate off
To Next Page
Loading...
