Epson Stylus Pro 10600 - Paper Feed and Jam Issues

-265
❏ Run the Head Cleaning utility. See “Using the Printer
Utilities” for Windows and “Using the Printer Utilities” for
Macintosh.
❏ Select thicker paper in the SelecType mode. Check the paper
number setting in the Paper Configuration menu. See
“SelecType Settings”.
❏ The platen gap may be too narrow for your paper. Set the
platen gap setting to WIDE in the Printer Setting menu of the
SelecType mode. See “SelecType Settings”.
Color Documents Print in Black Only
Try one or more of these solutions:
❏ Make sure the color data settings in your application are
correct.
❏ Make sure Color/B&W Photo (for UltraChrome ink users) or
Color (for ColorFast and dye ink) is set in the “Main Menu”
for Windows or “Print dialog box” for Macintosh.
Printing Could be Faster
Try one or more of these solutions:
❏ To increase print speed, select the Automatic mode in the
“Main Menu” for Windows or in the “Print dialog box” for
Macintosh and then move the slider towards Speed.
❏ Do not run too many applications at the same time. Close any
applications you are not using.