-95
Maintenance mode list
Items
If you select ON, the printer saves all the print jobs you have
made, including test printing. If you selct OFF, the printer saves
only print jobs that were sent to the printer through the printer
driver.
* is factory set value
Item Parameters
“HEX DUMP” PRINT
“LANGUAGE” ENGLISH, FRENCH, ITALIAN, GERMAN,
SPANISH, PORTUGUESE
“UNITS” METRIC*, FEET/INCHES
“PARA, I/F” ECP*, COMPAT
“IEEE1284.4” ON, OFF*
“INTERNAL JOB CT” ON, OFF
“AUTO NZL CHK” ON*, OFF
“SSCL” EXEC
“MW7” A*, B, C
“MW7 BALANCE” -30 - 0* - +30
“MW1 SELECT” 1*, 2, 3, 4, 5, 6, 7, 8
“MW2 SELECT” 1*, 2, 3, 4, 5, 6
“DEFAULT PANEL” EXEC
“K/C/M/LC/LM/Y
CARTRIDGE INFO”
MANUFACT., CRTG, INK TYPE, INK CAP,
PROD.DATE, EXPIRE DATE, INK LIFE, AGE
“SN MENU” -
To Next Page
Loading...
