-97
UNITS
You can select the units for displaying length.
Note:
This item is available only when you choose ENGLISH in LANGUAGE.
Follow these steps to select the units.
1. In maintenance mode, press the Item button until UNITS is
displayed.
2. If you want to change the units, press the + or - button until
a suitable unit is displayed.
3. Press the Enter button to set the units.
PARA, I/F
This is for maintenance service person only.
IEEE1284.4
This is for maintenance service person only.
INTERNAL JOB CT
When ON is selected, all print jobs including Nozzle check pattern
and head alignment, are recorded in the JOB HISTORY. When OFF
is selected, only the print jobs that are sent through the printer
driver are recorded.
AUTO NZL CHK
You can select ON to check nozzles automatically, or OFF to not
check nozzles automatically.
SSCL
You can perform ultrasonic head cleaning.
To Next Page
Loading...
