Epson Stylus Pro 10600 - Incorrect Margins

-258
❏ Select your printer as the default printer in Windows. See
“Your EPSON printer is not selected as the default printer”.
❏ Clear any stalled print jobs from the Progress Meter (for
Windows), or EPSON Monitor3 (for Macintosh). See “Using
the Progress Meter” for Windows or “Using EPSON
Monitor3” for Macintosh.
❏ Turn off the printer and computer. Make sure the printer’s
interface cable is plugged in securely.
❏ Make sure the running application is for Windows or
Macintosh.
❏ Make sure the EPSON Stylus Pro 10600 UC (for UltraChrome
ink users), EPSON Stylus Pro 10600 CF (for ColorFast ink
users), or EPSON Stylus Pro 10600 DYE (for dye ink users)
printer driver is selected.
If you are using Windows NT 4.0, try to uninstall the EPSON
Printer Port. Click Start, point to Programs, then point to
EPSON Printers, and point to EPSON Printer Port Uninstall.
Follow the messages on the screen.
Incorrect margins
Try one or more of these solutions:
❏ Check the margin settings in your application.
❏ Make sure the margins are within the printable area of the
page. See “Printable area”.
❏ For Windows, check the settings in the Paper menu. Make
sure they are correct for the paper size you are using.