-121
To enable Roll Width, select the Auto Rotate check box. Then
click the Roll Width button and select the installed roll paper size.
Auto Cut
When Auto Cut is selected the roll paper will be cut automatically
after each print job.
To enable Auto Cut, select the Auto Cut check box in the Roll
Paper Settings box on the “Paper Menu”.
Print Page Line
You can specify whether to print a page line on the right side, and
also below the document for manual cutting.
To enable Print Page Line, select the Print Page Line check box
in the Roll Paper Settings box on the “Paper Menu”.
The Print Page Line operation changes according to the Auto Cut
setting as shown.
Auto Cut Print Page Line Printer’s Operation
Selected Selected Prints page line on the right side
only, and cuts paper
automatically after the print job.
Selected Not selected Cuts paper automatically after
the print job.
Not selected Selected Prints page lines on the right side
and below the document.
To Next Page
Loading...
