Epson Stylus Pro 10600 - Using Paper Other than EPSON Special Media; Using Roll Paper; Attaching the Roll Paper to the Spindle

-191
❏ Avoid storing the media in places exposed to high
temperature, humidity, or direct sunlight.
Using paper other than EPSON special media
When you use paper other than EPSON special media, or print
using the RIP (Raster Images Processor), see the instructions
included with the paper or RIP system, or contact your supplier
for more information.
Using Roll Paper
Attaching the roll paper to the spindle
When installing the roll paper onto the spindle, follow the steps
below. To remove roll paper or empty roll paper cores, see
“Removing the roll paper from the spindle”.
Note:
The following instructions are for the 2-inch roll paper spindle, but can
be used for the 3-inch roll paper spindle as well.
1. Slide the movable flange off the end of the spindle.