-232
A short distance
When you need to move the printer a short distance, follow the
steps below:
1. First turn off the printer and make sure the print heads are in
the home (far right) position. If not, turn the printer back on,
wait until the print heads move to the home position, then
turn off the printer.
2. Remove the following parts:
❏ Power cord
❏ Interface cable
❏ Paper basket
❏ Roll paper spindles
❏ Roll and cut sheet media
❏ All ink cartridges
❏ Optional Auto Take-Up Reel Unit (if installed)
❏ Optional Manual Cutter Unit (if installed)
3. Make sure that the ink cartridge clamps and the cover are
closed.
To Next Page
Loading...
