-66
INK LOW Ink cartridge(s) is (are) nearly empty. Replace the
ink cartridge(s) indicated by the Ink Out light(s).
When the ink cartridge(s) is (are) out, printing stops.
Printing can be resumed after empty cartridge(s)
has (have) been replaced.
NO INK CARTRIDGE You are replacing the ink cartridge(s).
DEFECTIVE INK CRTG CSIC error has occurred. Remove the cartridge
and reinstall it.
COMMAND ERROR This message is displayed in the following cases:
1. When the installed printer software is not correct
for your printer.
2. When damaged data is sent to the printer while
using the photo printing accelerator.
3. When the printer receives data with a wrong
command sequence for ESC/P2.
OPTION I/F ERROR A Type-B I/F error has occurred.
SERVICE REQ
nnnnnnnn
A fatal error has occurred.
MAINTENANCE REQ
nnnn
A part used in the printer has nearly reached the
end of its service life. Note the error number nnnn
and contact your dealer. See "Contacting
Customer Support".
TURN PWR OFF AND
ON
After clearing jammed paper, this message
appears. Turn the printer off and on.
CLOSE INK COVER The ink compartment cover is open. Close the
cover.
NOZZLE CHECK
ERROR
Correct test printing is not printed while Auto Nozzle
Check is performed.
WRONG
CARTRIDGE
This message is displayed when a wrong type of ink
cartridge is installed.
INVALID CARTRIDGE This message is displayed if an ink cartridge with the
wrong product number is installed.
NOT ENOUGH INK The ink remaining is not enough to finish cleaning.
UNABLE TO PRINT No paper is loaded when printing a pattern, such
as a nozzle check pattern.
To Next Page
Loading...
