Stylus Pro 7600/9600 Printer Service Utility 8/26/02
Custom Paper Configuration Page 16.
PAPER FEED ADJUSTMENT
Prior to performing the paper feed adjustment for horizontal micro banding you should first perform a nozzle test print
and cleanings, as the most common cause for horizontal micro banding is due to missing or deflected print head noz-
zles. Print head cleanings can be performed from the Utility tab in the Epson driver, from the Select Type printer con-
trol panel menu, or with the Power Head Cleaning selection in this utility program.
The Paper Feed Adjustment is used to remove horizontal micro banding usually noticed as thin dark or light evenly
spaced lines. This adjustment allows you to adjust the amount the paper is feed to remove horizontal banding. If the
paper is feeding too much a white horizontal micro band can be noticed. If the paper is feeding too little a dark hori-
zontal micro band can be noticed.
To Next Page
Loading...
