6
Attaching the paper basket
1. Insert the stanchion pins (G) to the hole on the
the base uprights backward.
2. Fully insert and attach the short basket hooks
to the upper guides of base upright left and
right.
3. Likewise, fully insert and attach the long
basket hooks to the lower guides.
4. Turning the stitch side downward, spread the
paper basket on the floor.
5. Holding the rear side shaft, pass it under the
horizontal struts and insert the both joint
sockets (H) on the stanchion pins.
6. Slide out the upper basket hooks to their full
length.
G
H
To Next Page
Loading...
