How to fix Epson All in One Printer that cannot configure network interface?
If you're unable to configure the network interface or print from the network with your Epson All in One Printer, the printer or network settings may be incorrect. First, check if you can print a status sheet. If you can print a status sheet, then verify the network settings.
What to do if Epson All in One Printer cannot print even with assigned IP address?
If your Epson All in One Printer cannot print even after assigning an IP address to both the computer and the printer, it might be because you assigned the IP address to the computer manually, but the printer received its IP address through Automatic Private IP Addressing (APIPA). To resolve this, use EpsonNet Config or the printer’s control panel to assign the printer an IP address that belongs to the same segment as the computer.
What to do if Epson All in One Printer shows 'Could not complete communicating configuration data'?
If you receive the message “Could not complete communicating configuration data” when sending settings to the network interface of your Epson All in One Printer, especially when using a dial-up router, run Command Prompt from the computer where EpsonNet Config is installed. Then, enter the following command: Format: >ROUTE_ADD_the IP address of the network interface_ the IP address of the computer (the under bar represents one space) Example: >ROUTE ADD 192.168.192.168 22.33.44.55.
How to replace maintenance cartridge on Epson Printer?
The maintenance cartridge is full. Replace the maintenance cartridge with a new one.
How to close the maintenance cover on Epson STYLUS PRO 3880?
The maintenance cartridge cover is open. Close the maintenance cartridge cover.
What to do if my Epson Printer displays 'Paper Feed Error Load Paper Correctly and Press Paper/Feed Button'?
The printer could not feed the paper. Set the paper correctly, and then press the Paper Feed/Down button.
How to resolve 'Paper Setting Error Check Paper Source in the Driver Settings and Load Paper Correctly' on Epson Printer?
The paper path is wrong. Check the Paper Source setting in the printer driver, and load the paper correctly.
Why does my Epson Printer say 'Cleaning Error Press The Down Button And Remove Thick Paper'?
Cleaning cannot be executed because thick paper is loaded. Remove the thick paper.
What to do if my Epson Printer shows 'Paper Eject Error Press The Down Button And Remove Paper'?
The printer could not eject the printout. Press the Paper Feed/Down button, and then remove the printout.
General| Color | Yes |
|---|---|
| Maximum resolution | 2880 x 1440 DPI |
| Number of print cartridges | 9 |
| Roll paper | No |
| Maximum print size | A2 (420 x 594 mm) |
| Paper tray media types | Glossy paper, Matte paper, Photo paper, Plain paper |
| Print margin cut-sheet | 0 x 0 x 0 x 0 mm |
| Recommended media weight | 64 - 255 g/m² |
| ISO A-series sizes (A0...A9) | A2, A3, A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B4 |
| Country of origin | Japan |
| Sound pressure level (printing) | 39 dB |
| Package depth | 800 mm |
| Package width | 530 mm |
| Package height | 400 mm |
| Package weight | 24795 g |
| Bundled software | Epson LFP Remote Panel Utility\\r Epson ColorBase 2.0\\r Epson Print Plugin Adobe Photoshop\\r Epson Copy Factory 5 v 4.25 |
| Compatible operating systems | Windows 2000/XP/XP x64/Vista, Mac OS X 10.3.9/10.4.x/10.5.x |
| Power requirements | AC 220-240 V |
| Power consumption (standby) | 5 W |
| Power consumption (typical) | 25 W |
| Sustainability certificates | ENERGY STAR |
| Storage temperature (T-T) | -20 - 40 °C |
| Operating temperature (T-T) | 10 - 35 °C |
| Storage relative humidity (H-H) | 20 - 85 % |
| Operating relative humidity (H-H) | 40 - 50 % |
| USB connector | USB Type-A |
| USB 2.0 ports quantity | 1 |
| Pallet height | 2150 mm |
| Pallet length | 1200 mm |
| Pallet width (UK) | 1000 mm |
| Quantity per pack | 1 pc(s) |
| Quantity per pallet | 10 pc(s) |
| Quantity per pallet layer | 2 pc(s) |
Weight and Dimensions| Dimensions (WxDxH) | 257 x 684 x 376 mm |
|---|
Introduces the printer software suite and its main applications: driver, status monitor, and remote panel.
Explains how to open the printer driver interface from applications or the printer icon.
Covers monitoring print progress, canceling jobs, and handling printing errors.
Details on maintenance tools like Nozzle Check and software uninstallation procedures.
Lists the printer software available for Mac OS X: driver, utilities, status monitor, and remote panel.
Explains how to access and configure the printer driver on Mac OS X.
Covers monitoring and canceling print jobs on Mac OS X.
Details Mac-specific utilities and software removal processes.
Methods for controlling color output, including PhotoEnhance and driver adjustments.
Features for managing print layout, size scaling, and multi-page printing.
Special print features like double-sided printing and driver customization.
Description of buttons, lights, LCD display, and icons on the control panel.
Procedures for using the printer's menu system and settings.
Procedures for checking nozzles, aligning print heads, and setting paper.
Advanced maintenance tasks like printing status sheets and using Maintenance Mode.
Guidelines for using different paper types and loading procedures for cut sheet media.
Procedures for replacing ink and maintenance cartridges.
Instructions for keeping the printer clean and functional.
Guidelines for moving the printer and setting it up again.
General guidance and interpretation of error messages and indicators.
Solutions for specific problems like no power, no print, or poor quality.
Detailed step-by-step instructions for removing jammed paper.
Technical specifications including printing, mechanical, electrical, and environmental data.
Details on paper types, ink cartridges, system requirements, and interfaces.
Information on replacement consumables like ink cartridges and special printing papers.
Essential safety guidelines for product usage, placement, setup, and handling.
To Next Page