3. Select Borderless, and then click Expansion.
4. Select Auto Expand or Retain Size. If you select Auto Expand, you can change the amount
of enlargement.
Max In the case of A2 size, about 5 mm for bottom, 3.3 mm for top, and 4.5 mm for left and right
Mid Half of Max
Min 0 mm
Note:
Moving the slider towards Min decreases the amount of the image enlargement; however, as this
amount decreases, margins may appear on one or more sides of the paper.
5. Check the other settings, and then start printing.
Epson Stylus Pro 3880 User’s Guide
Variety of Printings 69
To Next Page
Loading...
